features needed
Username: cheriekitten
Post Date: 2026-10-09 21:58:53
i am now the owner of a tourbox elite plus and so i have begun testing it with rebelle. even though it obviously is not made for rebelle it should be able to be used with it as you can set custom presets.
so far i have noticed a few things
in rebelle
we cant adjust opacity mid stroke ( we should be able to ! )
we cant adjust brush size midstroke ( though we used to be able to and it was called a bug ) bring this back!
the tourbox is able to move around a color wheel however in rebelle this does not work as expected.
it just gets stuck no matter what. usually on white for me.
which was previously reported but we really need this fixed.
[URL='https://www.escapemotions.com/community/forum/t/45950/rebelle-8-3-color-adjustment-shortcut-issue/']link[/URL]
we also need a way to set layer blend modes with keyboard shortcuts
it takes forever to scroll through and select a blend mode after making a new layer if i could set it as a key combination that would be a lot easier.
for express oils
the blend modes are only able to be used in this mode not the regular oils which sucks, but fine.
but the problem is that their blend modes are weak no matter what in comparison to layer blend modes even though they should be the same ones.
i want them to work like layer blend modes and use actual transparency and opacity vs now even on glaze mode they are not transparent enough and dont really follow the expectation of the blend mode selected.
[ATTACH type="full" alt="Screenshot 2026-10-09 155630.png"]3634[/ATTACH]
when importing an image selection gets stuck.
lets say you import an image, it forces you to hit okay at the bottom. if you dont and click to a tool it will still have that stupid okay button at the bottom until you click it off.
it slows down the workflow to a trickle and prevents importing several images because every single one needs you to hit okay for some unknown reason.
idk why you even need to hit okay. you can move it around later, transform it later etc.
the way quickfill works now makes no sense to me
you just have 2 paint bucket tools now basically.
and the magic wand was better the other way it had worked before the update was released.
gradient maps make 0 sense.
rebelles color picker for it is the strangest tool ive ever used.
it lags, it has a weird color selection system, i find it absolutely unusable.
masking layers dont make sense to me either.
ive never been able to figure out how to properly use them because they work so differently to other programs like photoshop etc.
it seems way overcomplicated for a basic thing.
aside from the color wheel getting stuck none of these are really bugs, i just hate the way they work currently.
tourbox is able to cycle through opacity, size, color, probably even water etc but rebelle cant handle the quick input and ability to change it on the fly so it makes the investment in the tool kind of not worth it entirely. unless rebelle could be updated to handle these things on the fly.
Username: Michal Escape Motions
Post Date: 2026-10-13 15:46:25
[B]Blending mode for Layers vs. for Brush strokes[/B]
When you have a layer which blends onto the paper underneath, it always has some bottom color to be blended with. In your example image it's black background. When you paint a brush stroke, it blends only with the paint already laid down on the current layer, which is transparent outside the already painted area.
In your example, for the part of the bright-red stroke that's outside the dark-red circle:
[LIST]
[*]for layer blending mode set to overlay, that outside area is blended with the black paper color
[*]for stroke blending mode set to overlay, that outside area is blended only with the transparent color of the same layer. That outside area has alpha=0.
[/LIST]
One tricky thing you should be aware of is in Rebelle's Preferences -> Color -> Hidden Canvas Color Settings. It's set to "Preserve colors when possible, keep original transparency" by default, which is a different behaviour than with other painting apps which behave like the setting "Don't adjust colors".
Username: cheriekitten
Post Date: 2026-10-14 04:01:35
[QUOTE="Michal Escape Motions, post: 34842, member: 170"]
[B]Blending mode for Layers vs. for Brush strokes[/B]
When you have a layer which blends onto the paper underneath, it always has some bottom color to be blended with. In your example image it's black background. When you paint a brush stroke, it blends only with the paint already laid down on the current layer, which is transparent outside the already painted area.
In your example, for the part of the bright-red stroke that's outside the dark-red circle:
[LIST]
[*]for layer blending mode set to overlay, that outside area is blended with the black paper color
[*]for stroke blending mode set to overlay, that outside area is blended only with the transparent color of the same layer. That outside area has alpha=0.
[/LIST]
One tricky thing you should be aware of is in Rebelle's Preferences -> Color -> Hidden Canvas Color Settings. It's set to "Preserve colors when possible, keep original transparency" by default, which is a different behaviour than with other painting apps which behave like the setting "Don't adjust colors".
[/QUOTE]
so are you saying if i set it to a different hidden canvas color setting that it will blend differently when using express oils in glaze or normal?
the canvas layer is black yes but if you remove it then you can see the stroke transparency and color it leaves is still different on a layer vs using the express oils blend modes.
and the glaze mode is still opaque vs the layer mode
top is overlay layer mode
bottom is overlay glaze mode from express oils
same colors
base a midtone red
overlay is full saturation red
[ATTACH type="full"]3651[/ATTACH]
Username: Michal Escape Motions
Post Date: 2026-10-14 11:54:56
Brush blending mode (in Express Oils / Glaze or Normal) isn't influenced by the paper color (black in your example). Outside the midtone-red circle there are only transparent pixels in the layer. Brush blending doesn't see the paper or other layers, just the current layer you're painting on. The Overlay blending mode works exactly that way: transparent pixel with zero alpha below + bright red pixel above = bright red pixel
Now for layer blending consider the following layout:
- Layer 2 (bright red stroke, Overlay blending mode)
- Layer 1 (midtone red circle, Normal blending mode)
- Paper (black)
It's applied in following steps:
1. Paper below + Layer 1 above = let's call the result "A"
2. A below + Layer 2 above = final result
The important distinction here is that A has full opacity everywhere (because of the paper), pure black outside the midtone red circle, very dark red inside it. Then Layer 2 blends on top of fully opaque A.
Now if you hide the paper, you should get the same result as for the Overlay blending mode set in the brush, but only if you have "Don't adjust colors" set in Rebelle's Preferences -> Color -> Hidden Canvas Color Settings. Otherwise the hidden paper's black color still influences the result as seen in the top part of your recent image example where you see black color instead of the expected bright red as in the bottom part.
Username: cheriekitten
Post Date: 2026-10-14 12:22:39
[QUOTE="Michal Escape Motions, post: 34851, member: 170"]
Brush blending mode (in Express Oils / Glaze or Normal) isn't influenced by the paper color (black in your example). Outside the midtone-red circle there are only transparent pixels in the layer. Brush blending doesn't see the paper or other layers, just the current layer you're painting on. The Overlay blending mode works exactly that way: transparent pixel with zero alpha below + bright red pixel above = bright red pixel
Now for layer blending consider the following layout:
- Layer 2 (bright red stroke, Overlay blending mode)
- Layer 1 (midtone red circle, Normal blending mode)
- Paper (black)
It's applied in following steps:
1. Paper below + Layer 1 above = let's call the result "A"
2. A below + Layer 2 above = final result
The important distinction here is that A has full opacity everywhere (because of the paper), pure black outside the midtone red circle, very dark red inside it. Then Layer 2 blends on top of fully opaque A.
Now if you hide the paper, you should get the same result as for the Overlay blending mode set in the brush, but only if you have "Don't adjust colors" set in Rebelle's Preferences -> Color -> Hidden Canvas Color Settings. Otherwise the hidden paper's black color still influences the result as seen in the top part of your recent image example where you see black color instead of the expected bright red as in the bottom part.
[/QUOTE]
thats crazy.
so is that all that changes as a result of setting it to dont adjust?
or are blends now completely different?
awhile back when i first got the software i tried looking into that setting but the manual really doesnt say much about it other than opening in other programs will be affected.
[ATTACH type="full"]3652[/ATTACH]
Username: Michal Escape Motions
Post Date: 2026-10-14 12:40:08
Regarding the "Hidden Canvas Color Settings", it's been working this way in Rebelle for several years already. It may be confusing, but all those 3 options have their pros and cons and you need to choose yourself which option fits your use case the best. And they are relevant only when you hide paper.
Blending mode fixes mentioned in the thread [URL='https://www.escapemotions.com/community/forum/t/45979/question-issue-with-layer-blending-modes/']Question/Issue with layer blending modes[/URL] aren't related to this.
Username: cheriekitten
Post Date: 2026-10-14 13:12:23
[QUOTE="Michal Escape Motions, post: 34853, member: 170"]
Regarding the "Hidden Canvas Color Settings", it's been working this way in Rebelle for several years already. It may be confusing, but all those 3 options have their pros and cons and you need to choose yourself which option fits your use case the best. And they are relevant only when you hide paper.
Blending mode fixes mentioned in the thread [URL='https://www.escapemotions.com/community/forum/t/45979/question-issue-with-layer-blending-modes/']Question/Issue with layer blending modes[/URL] aren't related to this.
[/QUOTE]
well thats why this stuff needs to be in the manual. doesnt matter how long it's been this way if its too confusing and not even mentioned so no one understands it.
this is good info.
thank you for taking the time to explain it.
i would still prefer the brushes to use the same blending modes as the layers though.
and hot keys for the layer blending modes so i can make a macro for a new layer of whatever blending mode i want.
i waste so much time going through that menu every day, every time i want to make a new layer.
One account,
many possibilities